Blog

Clean up the floor first, then use the marble glue to repair the cracks and damaged points. Rough grinding, fine grinding and polishing the marble floor till the glue is dried.

When using a grinder to grind the floor, some problems often occur. For example, the diamond polishing pads always fall off. This phenomenon is also a problem that many people encounter during the construction process with the diamond pads.

No matter how nice your garage floor is when it’s first installed, and regardless of how well you take care of it, you’ll eventually get a garage floor crack that needs repair. It is very common that garage floor have cracks after a long period of use.

Cracks in a concrete garage floor may indicate that there are foundation problems or other issues. The good news is that most cracks in garage floors are common and not an indication of serious structural issues.

In the processing of stone, diamond polishing pad is mainly used to grind and polish the stone. The stone processed by diamond polishing pad has a high mirror surface gloss, which can give people a good visual effect and improve the added value of the stone product.

In the process of floor renovation, we sometimes encounter the problem of scratches on the floor. Although we should deal with the problem in time, we must also figure out the cause of the scratches. This can be better avoid the occurrence of such problems.

The easy edge ceramic polishing wheel is a ceramic bond matrix that holds the diamond particles together better than a traditional resin bond. And it will last longer than similar products.

Terrazzo flooring is made of chips of marble, granite, quartz, glass, and other aggregate materials, that are held together in a composite with a binder such as epoxy or cement. This material is then cured and ground smooth before being polished to a high gloss.

Epoxy floors may have cracks during the construction process. Although there are many reasons for this phenomenon, the prevention and improvement measures are roughly the same, and construction joints are often used.

When we are doing concrete floor construction, there are some materials and tools that are necessary and need to be prepared in advance.

There will be some scratches due to man-made or natural factors after the floor has been used for a long time. And these scratches will mainly affect the overall decorative effect. Scratches are also prone to appear during the grinding process. But these scratches can be avoided construction.

The concrete floor is polished by a grinding machine and a hardener (seal curing agent) is used to form a concrete floor under the combined action of chemical and physical. It is a kind of concrete floor with a certain gloss and high hardness.